GE761 Series
Product > Traction Motors > GE761 Series
| Product Name | Part Number | |
|---|---|---|
| GE | ||
| ARMATURE SHAFT | 8843544G1 | |
| PLATE , 3 IN LONG | 9961552P2 | |
| COIL WITH POLE PIECE , EXITING(OPEN) | 41D732687G4 | |
| SPEED SENSOR | 41B537105G1 | |
| ARMATURE CORE LAMINATION SET | 9949018P1 | |
| NUT | 41A231420P1 | |
| BRUSH HOLDER | 41C633996G2 | |
| END PUNCHING , 0.125 IN THICK | 41B530027P1 | |
| CABLE ASSY | 41B537185G2 | |
| CARBON BRUSH | 41A235897P3 | |
| TRACTION MOTOR | 5GE761A19 | |
| O-RING , 0.614 IN ID | 41A219499P16 | |
| PAD , 7/32 IN THICK,8/7 IN ,1 1/2IN | 41A231248P1 | |
| CABLE ASSEMBLY WITH BUSHING,BRUSH HOLDER | 41B537974G1 | |
| COIL WITH POLE PIECE EXCITING FIELD - CLOSED | 8855153G14 | |
| COMMUTATOR , SEASONED | 9949046G6 | |
| BOLT,HEX HD,7/8 IN-9,1 3/4 IN LONG | 8819331P1 | |
| COLLAR | 41A231419P1 | |
| BLANCE WEIGHT,3/4 IN WIDE | 2766829ADP43 | |
| CABLE ASSEMBLY WITH BUSHING - FF 85 INCH LONG | 41B537416G2 | |
| COIL WITH POLE PIECE , COMMUTATING | 8843549G4 | |
| ROLLER BEARING | 8864951P151 | |
| WIRE , 0.080 IN DIA | 41A330208P4 | |
| CONNECTION STRAP | 9949030G1 | |
| CABLE ASSEMBLY WITH BUSHING BRUSH HOLDER | 41B537417G1 | |
| RETAINING COLLAR | 41A231426P1 | |
| GASKET , 0.375 IN THK,17.38 IN LONG | 41C637214P4 | |
| TEFLON RING (TRANSBAND) | 41B537080P2 | |
| BEARING CLAMP/SPEED SENSOR GEAR | 41C637294P1 | |
| SPRING SEAT | 41A330248P1 | |
| PIN | 41A305090P6 | |
| FRAME HEAD | 41C630228P2 | |
| CAP BEARING - P.E. | 41B530705P1 | |
| BOLT WITH WASHER,1.4 IN-20,5.8 IN LONG | 41A231439P2 | |
| BALL BEARING | 8864950P149 | |
| BRUSH HOLDER | 8843525G1 | |
| CABLE ASSEMBLY - GROUNDING | 41B537416G5 | |
| SUPPORT , BRUSH HOLDER | 8828693P3 | |
| COIL WITH POLE PIECE EXCITING FIELD - OPEN | 8855153G12 | |
| OIL FILLER CAP,3/4" , WHITE | 41A238534P1 | |
| AXLE CAP | 8855139G3 | |
| PIN | 41A233880P3 | |
| SEAT WITH PIN SPRING | 41A233867G2 | |
| BRUSH HOLDER STUD (0.002 IN OVERSIZE) | 41A237066P4 | |
| PERMAFIL PUTTY | 41A239176P456 | |
| BALL BEARING - CE | 8864950P169 | |
| SPRING SEAT WITH PIN | 41A233867G4 | |
| BRUSH HOLDER STUD - MOLDED (0.002 IN O.S.) | 41B535754G41 | |
| CABLE CLEAT , 8 3/4 IN LONG | 41B535914P3 | |
| SEAT SPRING | 41A233868P1 | |
| PINION - 18 TEETH | 41C635677P1 | |
| INSPECTION COVER , HAND HOLE | 9961549G1 | |
| BOLT,HEX HD,1 IN-8, 5 1/2 IN LONG | 8819178P1 | |
| TEFLON BAND | 41A230144P25 | |
| FLINGER RING - CE | 41A330086P1 | |
| BOLT,HEX HD,7/8 IN-9,3 3/4 IN LONG | 41A330344P1 | |
| CONNECTION STRAP - FLEXIBLE | 41B532413G4 | |
| GASKET , 0.25 IN THK , 11.5 IN LONG | 41C637214P2 | |
| BEARING CAP | 41B537932P1 | |
| WASHER,BELLEVILLE , 0.826 IN ID | 41A239548P1 | |
| CEMENT (A15B14E2) | 497A806P53 | |
| BALANCE WEIGHT, 5/8 IN WIDE | 2766829ADP14 | |
| WASHER , CHAIN ANCHOR | 9949050P2 | |
| ROLLER BEARING - PE | 8864951P150 | |
| SPRING | 41A238759P1 | |
| RING | 41A231453G1 | |
| CALIBRATING SCREW,NO 10-32,2 7/16IN LONG | 6706033G1 | |
| LOCKING KEY | 6719625P6 | |
| INSULATING SLEEVE | 41B519443P4 | |
| CONNECTION STRAP - FLEXIBLE | 41B532413G3 | |
| CABLE ASSEMBLY WITH BUSHING, 88 IN LONG | 41B537416G3 | |
| TAPE - MICA - 0.005 IN THICK - 0.750 IN WIDE | 41A239176P18 | |
| TRACTION MOTOR | 5GE761A23 | |
| CABLE ASSEMLBY | 41B537417G2 | |
| SLEEVE | 41A232340P3 | |
| CONNECTION STRAP | 41A235688G1 | |
| WEAR PLATE | 41A230527P1 | |
| CAP BEARING - CE | 9949022P1 | |
| PRESSURE ARM WITH BUSHING | 41B532884G2 | |
| SHAFT WITH PLUG | 41C637265G1 | |
| BEARING CAP | 41B537104P1 | |
| WASHER,FLAT,0.968 IN ID,1.75 IN OD | 41B537660P19 | |
| KEY , 2 IN LONG | 8819164P1 | |
| SPEED SENSOR | 17MM102K1 | |
| COIL WITH POLE PIECE,EXCITING(CLOSED) | 41D732687G3 | |
| PIPE PLUG | 6705244P1 | |
| GASKET , 0.250 IN THK , 7.25 IN SQ | 41C637214P3 | |
| CARBON BRUSH - GE761 TM | 41A235897P5 | |
| KEY - 2 IN LONG | 8819164 | |
| COVER | 8843545G5 | |
| BOLT, HEX HD, 3/4 IN-10 , 1 1/2 IN LONG | 8808885P1 | |
| CHAIN | 41A235879P1 | |
| INSPECTION COVER , BOTTOM | 9949049G1 | |
| BALANCE WEIGHT , 21/32 IN WIDE | 2766829AGP1 | |
| SUPPORT , BRUSH HOLDER | 9961515P2 | |
| SILASTIC PUTTY | 41A239176P443 | |
| HOUING BEARING - CE | 8843512P1 | |
| ARMATURE ASSEMBLY | 41C637202G3 | More |
| REWIND KIT , ARMATURE | 41D731384G5 | |
| ROLLER BEARING - PE | 8864951P148 | |
| CABLE ASSEMBLY WITH BUSHING,76.50IN LONG | 41B537416G1 | |
| WIRE , 0.062 IN DIA | 41A330208P3 | |
| BRUSH HOLDER | 41C637788G1 | |
| SPRING | 41A237901P1 | |
| GASKET | 8819143P1 | |
| PIN | 41A305090P9 | |
| CONNECTION STRAP | 9949030G2 | |
| FLINGER, SPT BEARING, 7-1/4" , 761 | 41B537921G1 | |
| FIBERGLASS TAPE, 0.004 IN THICK,1IN WIDE | 41A239176P13 | |
| BRAZING ALLOY. 0.050 x 0.062 IN | 41A330300P2 | |
| BEARING HOUSING | 41B537106P1 | |
| ARMATURE | 41C630398P1 | |
| BEAZING STRIP,0.01IN THK,3/4IN WIDE,3/4 | 41A231281P33 | |
| PIN , 3/8 IN DIA , 3 3/8 IN LONG | 41A231378P3 | |
| BEARING CAP - PE | 41B530705P3 | |
| GASKET , 12 7/8 IN DIA | 8819142P1 | |
| CARBON BRUSH T900 | 41A235897P4 | |
| PLATE , CABLE CLEAT | 41B535914P2 | |
| ARMATURE ASSEMBLY | 41C633243G1 | More |